12. Now reinstall GEM 3.0. Insert the GEM 3.0 System Master
Disk in drive A; then type the following, and press Enter:
GEMPREP
13. Follow the installation instructions in your GEM
documentation to change the existing configuration. When
you see Choose item to change, select Other
(Driver Pak).
14. The program prompts you to insert the driver pack disk in
drive A. Remove the System Master Disk, insert the
GEM_DRIVRPK diskette you created, and complete the
installation procedure.
Ventura Publisher, Versions 1.0 and 1.1
Epson provides drivers for Ventura Publisher, versions 1.0 and
1.1, in the following resolutions:
0
640 x 480 2-color graphics
0
800 x 600 2-color graphics.
Installing the Drivers
Follow the instructions below to install the display driver. If you
have already installed Ventura Publisher 1.0 or 1.1 on your
computer, go to step 2 to install the Ventura driver. If you have
not yet installed Ventura Publisher 1.0 or 1.1, begin with step 1.
1.
Install Ventura Publisher following the instructions in your
Ventura documentation. Specify a Hercules driver as the
temporary display driver.
2.
After you complete the Ventura Publisher installation,
insert the Utility 1 diskette in drive A.
Using the VGA Utilities
A-23
