A SERVICE OF

logo

Open as PDF
next previous
48
Installing the Transparency Unit
1. Make sure the scanner is turned off.
Then unplug the power cable from the
scanner.
2. Remove the document cover by grasping
it beside the hinges and lifting it straight
up.
3. Align the TPU hinge pins with the
holes in the scanner, then lower the
TPU until the pins rest securely in the
holes.
4. Close the TPU.
To avoid damaging
the TPU, do not place
heavy objects on it.
5. Attach the TPU connector
to the option connector at
the back of the scanner.
Secure the connector using
the attached screws.
6. Plug the scanner back in
and turn it on.