Submenu Function
Sleep Mode
When set to On, this automatically stops projection when no
image signal is being input and no operations are carried out for a
specified length of time. Also, if no image signal is input for a
specified length of time, the lamp dims until the power turns off.
When an image signal is input, the projector returns to normal
operating status.
Sleep Mode Tim
er
When Sleep Mode is set to On, you can set the time before the
projector automatically turns off within a range of 1 to 30
minutes.
A/V Mute Timer
When set to On, this turns off the power automatically 30
minutes after A/V mute is enabled. Also, if A/V mute is enabled
and a specified length of time has passed, the lamp dims until the
power turns off. When A/V mute is disabled, the projector
returns to normal operating status.
Standby Mode
If you set Communication On, you can perform the following
operations even if the projector is in standby mode.
• Monitor and control the projector from a computer over the
network
• Output audio and images to an external device (only when
A/V Output is set to Always On)
• Output audio from the projector's speaker (only when A/V
Output is set to Always On)
a
Set Connection Mode to Advanced when
monitoring and controlling the projector over
wireless LAN.
s Network - Wireless LAN - Connection
Mode p.115
ECO Display
When set to On, when the lamp brightness changes from normal
to low or low to normal, leaf icons are displayed at the bottom-
left of the projected screen to indicate the power-saving status.
Submenu Function
Reset
You can reset all adjustment values on the ECO menu to their
default settings, except for Standby Mode. See the following to
return all menu items to their default settings.
s "Reset Menu" p.135
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.43
List of Functions
134
