Use
[rl
or
m
or type the number of the desired option
to highlight a test and then press
CEnter]
to run it.
Note
If you selected to run the tests more than once, you do
not see a submenu. The program immediately begins
executing all the tests that do not destroy data.
5.
When the test is completed, you see the Execute menu or the
test submenu again. You can select another test or exit the
menu.
To exit System diagnostics, press
(-1)
to select
Quit
and
press [Enter. You return to the System Configuration
program Main Menu.
Resuming From an Error
If an error prevents a test from running, you see a Runtime
Error information box. Follow the instructions on the screen to
solve the problem.
If an error occurs during a test, the test stops and an error
message appears. If you want to record the problem, you can
print the message on your printer. You see this prompt:
Do you want a printout of the error
message(s) ? (Y/N)
To continue without printing, press
[Nl
and IEnter
To print the message, press
m
and IEnter The program prints
the message. Then press
[Enter
again.
For a complete list of the error messages the program may
display, see the table at the end of this appendix.
A-6
Running System Diagnostics
