Changing the Country Code
If you need to change the country code for your system’s
keyboard driver and configuration information, you can run
the CHGCTR utility. Follow these steps:
1.
Insert the Reference 1 diskette in drive A and log onto
drive A.
2.
At the
A>
prompt, type
CHGCTR
and press [Enter. You see the
information screen for the Change Country Code utility
followed by this prompt:
Change country code? (Y/N)
3.
If you want to keep the current country code, press IN).
You see a message telling you that the program still must
update your files. Then the program copies the files. Go to
step 4.
If you want to select another country code, press [VI. You see
a list of the function keys to press to select a different code.
Press the appropriate function key for the country code you
want. The program copies the files and displays a message
confirming the change.
4.
When you see the following message, press any key to reboot
the system and run the System Configuration program:
Now you should reboot the system to run
the appropriate AUTOEXEC.BAT and
CONFIG.SYS files and start the System
Configuration program.
Press any key to reboot . . .
After a moment, you see the System Configuration title
screen. If you want to run that program now, see Chapter 2
for instructions.
l-10
Setting Up Your System
