A SERVICE OF

logo

Appendix A: Connecting to Additional Equipment
85
Connecting the Mouse Cable
To use the remote control as a mouse follow the steps below. If the
Macintosh has a USB port, you can use the USB mouse cable
included with the projector. If it has a round mouse port, you’ll need a
Macintosh mouse cable; see your projector dealer for help in obtaining
the correct cable.
1. Connect the round end of the USB mouse cable (or a Macintosh
mouse cable) to the projector’s
Mouse 1
port.
2. Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s mouse cable to the mouse or USB port on your
Macintosh.
Mouse 1 port
USB mouse cable
7700.book Page 85 Wednesday, November 1, 2000 6:15 PM