EPSON PowerLite 9300i Projector
14 - EPSON PowerLite 9300i Projector 10/03
Controlling Your Projector(s)
The control buttons in the upper-right of the EMP Monitor
screen let you turn on and off the projectors and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you’ve selected the
projector(s) you want to operate (with the mouse pointer)
before clicking one of the buttons.
Note: To turn on a projector when it’s in standby mode (plugged in
but not projecting), you must have selected
Network ON as the
Standby Mode setting in the projector’s Advanced1 menu.
Registering a Projector in
EMP NetworkManager
EMP NetworkManager lets you receive e-mail notifications
alerting you to possible projector problems.
1. To open the program, select
EMP NetworkManager from
the Start menu.
You see this screen:
In a few moments, your projectors are displayed as
icons as shown:
2. If you’d like to register a projector manually and you know
its IP address, click the
Projector address selection icon.
You see this screen:
3. Enter the projector’s IP address and click
Add. The
projector’s icon is added to the EMP NetworkManager
screen.
Creating the E-Mail Settings
1. If EMP NetworkManager is not already running, open it
from the Start menu.
You see your registered projectors displayed as shown:
2. Double-click the icon for the projector whose e-mail
settings you want to create.
Control buttons
