A SERVICE OF

logo

1
If you have the RS 5100 or another RIP, you connect it to the printer using
the built-in parallel interface. For connectivity without a RIP, you can install
one of the following cards:
EpsonNet Internal Print Server (10BaseT / 100BaseTX) — C823632A
EPSON FireWire Interface Card (Type B IEEE 1394) — C823722
Before you install the card, see the documentation that came with it for
setup information. Then follow these steps:
1. Make sure the printer is turned off and the power cord is unplugged.
Appendix A:
Installing an
Interface Card
Warning
To prevent electric shock
and avoid damaging the
printer, do not install an
interface card when the
printer is turned on or
connected to an electrical
outlet.