Epson M X - 8 0 Manual

A SERVICE OF

next previous

STEP 7.

Raise the two sprocket lock levers to loosen, and adjust the sprocket pin

position to the paper width. (See Fig. 13.)

Fig. 13 Raising of Sprocket Lock Levers

STEP 8.

Engage the paper feed holes of the paper on the feeding pins, push the

scale back into position, and adjust the tension of the paper. Then push

the paper holding covers and the two sprocket lock levers down. (See

Fig. 14.)

NOTE: In this case, confirm that the feeding pins are centered in the respective

paper feed holes of the paper.

Fig. 14 Engagement of Paper Feed Holes on Feeding Pins

-12-