Epson M X - 8 0 Manual

A SERVICE OF

next previous

STEP 10. Put the printer lid on the Printer. (See Fig. 33.)

NOTE: When the MX-80 F/T Type I I is to be used on a desk or a bench, arrange-

ment of the fanfold paper in parallel with the MX-80 F/T Type II as shown

below will permit the paper to be folded in an accordion style.

7.1.2. Removal of fanfold paper

To remove the fanfold paper, follow either of the two methods described below.

(1) To disengage the paper from the paper holding mechanism, pull it forward out

of the Printer.

NOTE: Do not attempt to pull out the paper in the backward direction.

(2) Feed the paper out of the Printer by electrical operation. For this, turn the

Power Switch on and push the Line Feed button. (Details are described later.)

-27-