Basic Operations 121
11.When multiple check patterns have been printed, select the number per check pattern,
and then press the Z button.
The media setup menu will be displayed when you enter the pattern number for the last
color.
Changing Settings During Printing
Heating & Drying and Feed Adjustment can be changed during printing using the
procedures shown below.
Heating & Drying
1. Press the button during printing.
The Heating & Drying menu is displayed.
2. Use the d/u buttons to select the desired option and press the Z button.
3. Choose a value.
Heater Temperature
Use the r/l buttons to select a heater. From left, the options are pre-heater, platen
heater, and after heater.
After selecting the desired heater, use the d/u buttons to choose the temperature.
Additional Dryer
Use the d/u buttons to select On or Off.
4. Pressing the Z button updates the currently selected media settings.
5. Press the y button twice to return to the customize settings menu.
