Appendix 239
Microweave (M/W) Setting and Banding Association Tables
The tables below show setting examples for the ONYX Graphics software RIP. For the
banding status described under “Result”, refer to the figure shown below.
S70675
After heater 50 50 50 50
Advanced Settings
Media Suction4444
Media Tension151530
2
15
Counterweight
1
--Attach-
1 See “Using the Auto Take-up Reel Unit” on page 92.
2 Change the factory default setting value.
Stripe banding example Tint unevenness example
Resolution
(dpi)
Number
of passes
M/W
level
Result Recommendation
Banner
720×720 6 1 Stripe banding less likely
2 Tint unevenness less likely ✓
Vinyl
720×720 8 3 Stripe banding less likely
4 Tint unevenness less likely, but stripe banding
more likely
5 Stripe banding less likely ✓
6 Tint unevenness less likely, but stripe banding
more likely
All media (Including Banner/Vinyl)
Adhesive vinyl Transparent or
white film
Banner Canvas
