Appendix 235
1
Not available for purchase in some countries and regions. If the clean room wipe is not available from
Epson, BEMCOT M-311 from Asahi Kasei Corporation is recommended.
2
Not available for purchase in some countries and regions.
Supported Media
The following media can be used with the printer. Print quality is greatly affected by the
type and quality of media used. Choose a media suited to the task at hand. For information
on use, refer to the documentation supplied with the media or contact the manufacturer.
We recommend that you print a test run and check the results before purchasing media in
large quantities.
Other Items
Product Part number Explanation
Cleaning cartridge T699000 Use to change the color mode to 8 Color (Unfixed) or 9 Color for print
head washing, pre-storage maintenance, or changing color mode.
Maintenance Kit T724100 Contains the cleaning sticks, gloves, wiper, wiper cleaner, flushing
pad, and cleaning wiper required for printer maintenance. See
“Cleaning Frequency” on page 129.
Ink Cleaner T699300 Use for ink stains that can not otherwise be removed during normal
maintenance. See “Cleaning Frequency” on page 129.
Waste Ink Bottle T724000 Identical to the waste ink bottle supplied with the printer.
Cleaning Wiper S090012 Identical to the maintenance kit items supplied with the printer.
Cleaning Sticks S090013
Clean Room Wipe
1
S090016
Media Holding Plate C12C890891 Identical to the media holding plate supplied with the printer. Sold on
a 1-plate basis. When replacing a removable media holding plate,
replace both the right and left plates together. SEE REPLACING MEDIA
HOLDING
Additional print Drying System C12890751 Uses a fan to blow air over the media and assist drying (included with
the S50675). See HEATING & DRYING.
Heavy Roll Media System C12C890761 A media feeding unit and auto take-up reel for heavy rolls (up to 80 kg
or 176.4 lb).
Important:
Do not use media that is wrinkled, scuffed, torn, or dirty.
