A SERVICE OF

logo

Plugging in and turning on the printer
1. Make sure you have removed all protective packing
materials from inside the printer.
2. Plug the power cord into a properly grounded electrical
outlet.
3. Turn on the printer by pressing the Operate button.
Installing the ink cartridges
c
Caution:
The ink cartridges are self-contained units. Under ordinary
use, ink will not leak from a cartridge. If ink does get on your
hands, wash them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with water.
Note:
Install both ink cartridges. If only one cartridge is installed, the
printer will not work.
Setting Up the Printer
1-5