When to Use the Optional LocalTalk Interface
If you want to connect the printer to an AppleTalk network
so multiple Macintosh computers can share the printer, you
need to obtain an EPSON Talk kit for the Stylus COLOR. To
purchase one, contact your dealer or call EPSON Accessories
at (800) 873-7766.
You can also use LocalTalk to connect the printer to a single
Macintosh. However, you must still create an AppleTalk
network using the LocalTalk Locking Connector Kits. See the
owner’s manual that comes with the LocalTalk kits for more
information about setting up an AppleTalk network.
Installing the Optional LocalTalk Interface Board
To install the LocalTalk interface board in your printer:
1. Turn off the printer.
2. Unplug the power cord from the electrical outlet.
w
Warning:
Do not install or remove an interface board when the
printer is connected to the electrical outlet. If you do, you
may damage your printer or Macintosh.
3. Turn the printer around so that its rear panel faces you and
disconnect any interface cables.
A-2
Using the LocalTalk Interface
