18 GPSMAP 3205 Owner’s Manual
basIc oPeratIon > revIewIng and edItIng waYPoInts
3. Press ENTER to review the highlighted waypoint on the Review Waypoint
Page.
4. Press the Next soft key to return to the waypoint list. The next waypoint in
the list is automatically highlighted.
Deleting Waypoints
The following soft keys are available when you highlight a waypoint on the User
sub tab:
•
New Waypoint—creates a new waypoint.
•
Delete—deletes the selected waypoint from the list and any route in which
the waypoint was used.
•
Del by Smbl—deletes waypoints that use the same symbol.
•
Delete All—deletes all waypoints from the unit.
NOTE: When you delete a waypoint from the list, it cannot be recovered from
the unit. Save important waypoints to a data card, or write them down.
To delete a single waypoint from the User sub tab:
1. Use the ROCKER to highlight the waypoint you want to delete, and then
press the Delete Waypoint soft key. A conrmation message appears.
2. Press the OK soft key to delete the selected waypoint.
To delete waypoints by symbol:
1. On the User sub tab, highlight the waypoint you want to delete.
2. Press the Delete By Symbol soft key.
3. Use the ROCKER to highlight the symbol of the waypoints you want to
delete, and press ENTER.
4. Press the OK soft key to delete the waypoints by symbol. Otherwise,
press the Cancel soft key to return to the User sub tab without deleting
any waypoints.
To delete all user waypoints:
1. On the User sub tab, press the Delete All soft key.
2. Highlight OK, and press ENTER to delete all user waypoints.
Proximity Waypoints
Use the Proximity sub tab to dene an alarm circle around a stored waypoint
location. The alarm circle can help you avoid reefs, rocks, or restricted waters.
You can add proximity alarms to a maximum of 10 waypoints or on-screen
map items, with a maximum alarm radius of 99.99 nautical or statute miles or
kilometers.
If a proximity alarm circle overlaps an existing alarm circle, the message
“Proximity Overlaps Another Proximity Waypoint” appears. Because the unit
only alerts for one of the overlap points, use caution when navigating in these
areas. If you enter a red proximity circle overlap, you are alerted only to the
closest proximity waypoint.
Proximity circle Proximity waypoint
