A SERVICE OF

logo

Library Operations
55ESL E-Series Tape Library User’s Guide
Inserting tape cartridges
Load tape cartridges into the library starting with the left side panels, then the
right side panels, and finally the back panel (see “Library storage locations and
slot numbering” on page 35 for detailed installation procedures). Be sure all
cartridges are properly positioned with the barcode facing you and fully seated in
the bins.
Caution: Handle tape cartridges with care. Do not drop or bang them, or
place them near sources of electromagnetic interference. Rough handling can
displace the tape leader, making the cartridge unusable and potentially
hazardous to the tape drives.