Chapter 8
Kodak ESP 9 Printer User Guide 65
4 To use the last fax number used, press Start now. Otherwise, press until the desired
recipient is selected, and then press
OK.
The Fax phone number of the selected entry displays in the menu header, replacing any
previous number. See the illustration below.
5 Press
Start to send the fax.
Using Quick Dial to select a Fax Phonebook entry
By assigning up to ten contacts in your Fax Phonebook with a number between 0 (zero)
and 9, the Quick Dial feature in your ESP 9 All-in-One printer allows you to create
shortcuts for quickly sending Faxes to them.
There are two ways to use the Quick Dial feature for sending faxes.
Specifying a Quick Dial recipient from the keypad
1 Load the original. As appropriate review “Preparing a fax for transmission” on page 69.
2 From the control panel, press
Menu.
3 Press
to select Send Fax and then press OK.
4 Select the appropriate key on the control panel’s keypad associated with the Quick Dial
entry, and then press
Start. For example, press 8 to specify the entry assigned the Quick
Dial value of “08.” See the illustration below.
Note: To configure a fax recipient as a Quick Dial entry, review “Fax Phonebook
entries” on page 67.
