Lifetime 6417 Manual

next previous

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

102

SEC

18.1

18.2

AHT

SEC

9OUMAYNEEDTOADJUSTTHEHEIGHTOFTHE#ENTER$OORTOELIMINATEANUNEVENGAP,OOSENTHETWO.UTSONTHE

Hex Bolt on the Carriage Bracket to raise or lower the Center Door. Once the door has been adjusted to the

desired height, retighten the Nuts.

Adjust these nuts to raise

and lower the Center Door.

Carriage Bracket

Hex Bolt

If you plan on anchoring your shed, you can anchor it to your platform through the Floor Brackets (AHT) at the

bottom of each Wall/Shelf Support Channel. The anchoring hardware used depends on the platform. If you

HAVEACONCRETEPLATFORMWERECOMMENDUSINGFOURTEENv!NCHOR"OLTSANDFOURTEENvXv

&LAT7ASHERS)FYOUHAVEAWOODFRAMEDPLATFORMWERECOMMENDUSINGFOURTEENv,AG"OLTSAND

FOURTEENvXv&LAT7ASHERSDo not exceed a 3/8” diameter bolt for the Floor Brackets. Refer to your local

hardware store for this hardware.9OUCANANCHOREACH$OOR&RAME3UPPORT"RACKETSTOTHE&LOORUSINGTWO

1/4” x 5/8” Pan-Head Screws (ADZ)ORYOUCANANCHOREACHOFTHEMTOYOURPLATFORMUSINGTWOv!NCHOR

Bolts or 1/4” Lag Bolts. Do not exceed a 1/4” diameter bolt for the Door Frame Support Brackets. Refer to your local

hardware store for this hardware.

Door Frame Support Bracket

CENTER & LEFT DOOR ADJUSTMENT

ANCHORING SHED

18.1

18.2

5/16”X

Note: Insert anchoring hardware through the Floor Brackets

(aht) attached to the bottom of each Wall Support.

ADZ (x4)

ADZ