A SERVICE OF

logo

Open as PDF
next previous
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
24
SEC
To ensure studs are in the correct location
for nailing to plywood in the next step, start
measuring here, and then measure from
center to center.
2” x 4” x 120 1/2” (x9)
2” x 4” x 123 1/2”X
16d 3” Common NailX
123 1/2”
123 1/2”
Note: All lumber must be rated for outdoor use.
!
Note: Surface must be leveled before installation. If the surface is not properly leveled, the Outdoor Shed will not assemble or function correctly.
Proper surface leveling will save you time in the long run, so please do not ignore this step.
!
1
SEC
1.2
ALTERNATIVE SITE PREPARATION: OPTION 1 - WOOD PLATFORM ASSEMBLY
Ensure you use lumber that is treated and approved for outdoorUSE"UILDOUTSIDEFRAMETOvBYv
outside dimensions.
16” 16” 16” 16” 16” 16” 16”