Lifetime 6417 Manual

next previous

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

Concrete (1 cu. yd.)

132”

123 1/2”

132”

SEC

1.1

SITE PREPARATION - CONCRETE PLATFORM PREPARATION

The actual dimensions of your shed (at its widest and longest points) are 11’ x 11’. Be sure to select a site that

will accommodate these measurements. The base of the shed is slightly smaller than this, so you will need to

CREATEALEVELSURFACETHATISvXvv4HEmOOROFTHESHEDWILLHAVEASLIGHTOVERHANGTOHELP

prevent water from pooling under the ﬂoor. We recommend using a level concrete or patio style surface. This will

provide the best long-term performance for your shed.

Note: Shed Extension Kits are available for this shed. Please consider possible shed expansion when planning the site for your shed. See inside the

back cover of this manual for information on ordering Extension Kits.

Note: Surface must be leveled before installation. If the surface is not properly leveled, the Outdoor Shed will not assemble or function correctly.

Proper surface leveling will save you time in the long run, so please do not ignore this step.