Conversion Instructions
Issue 1 June 2000
2-35
This message signals the start of the second stage, the stage that starts
the voice system. This stage includes auditing a database, initializing the
INTUITY AUDIX application, and running file checks. The system then
displays:
Startup of the Voice System is complete.
Saving output to trace process.
Saving the output to trace process takes approximately a minute
When the system is finished, it displays the following message:
Startup of the Voice System is complete.
The system messages might wipe out the
Console Login prompt.
Please hit the <ENTER> key after the messages stop
scrolling on the screen.
NOTE:
If you are working on an older system, these messages may not be
displayed. Press to obtain a console prompt after the trace
process message appears.
2. Press to obtain a console prompt.
The system displays a Console Login prompt:
The systems’s name is Intuity
Welcome to USL UNIX system V Release 4.2 Version
Console Login:
3. Log in as craft.
4. Determine your next step:
■ If you changed the system’s channel numbers, continue with Task
14, Test the Channels if the Mapping Changed.
■ If you did not change the system’s channel numbers, continue with
Task 16, Clear any Alarms.
Task 14 - Test the Channels if the Mapping
Changed
If you changed the channel numbers, see Channel Mapping:
1. Verify the channel state, page A-4.
2. Assign service to channels for testing, page A-8.
3. Test each channel, page A-10.
4. Assign services to called numbers, page A-13.
5. Map services to channels for operation, page A-13.
ENTER
ENTER
