Release the Voice Ports
Issue 1 June 2000
B-13
Figure B-7. Release of Voice Equipment Screen
4. Complete the following fields:
■ Equipment: Enter ca
■ Equipment number: Enter the range of
0 – the number of the last card
■ Change Immediately?: Enter yes
5. Press (Save).
The system displays a Command Output screen.
6. Press (Cancel).
The displays the Diagnose Voice Equipment screen.
7. Press (Cancel) three times to return to the Lucent INTUITY
Administration menu.
8. Determine your next step:
■ If the system is networked, continue with “Release the Networking
Ports”.
■ If the system is not networked, determine your next step:
— If the system has the Call Accounting System (CAS)
software, continue with Chapter 2, “Conversion Instructions,”
Task 15, “Change the CAS Switch Assignment,” page 2-36.
— If the system does not have CAS, continue with Chapter 2,
“Conversion Instructions,” Task 16, “Clear any Alarms,” page
2-37.
F3
F6
F6
