MS9400 HD FrEND User Guide Chapter 6: Remote Control Protocol
37 Rev. 1.50
<clip> - a media-clip name.
<channel> - a specific channel.
<channel list> - a list of channels or ‘all’ for every channel.
A <channel list> parameter is mandatory for commands that act on specific channels, but will be absent for
generic player commands. Each section below will indicate whether a channel list is required. The channel list is
a “,” (comma) separated list of channels such as the following
1,2,3 - The command will apply to channels 1, 2 and 3.
A special symbol is also defined for all channels
ALL - The command will apply to all channels
NOTE: Channels are numbered starting at 1.
Local Control
Use the hand-held remote or connect a USB computer keyboard directly to the MS9400.
Network Control
Connect the MS9400 to a show-control computer/system running ESCAN or other control application on a LAN.
