Memorizing channels
Important:
You can use the menus to automatically memorize the channels
your TV can receive. Once channels are memorized, you can scan
through them using the channel controls on the :remote control or
on the front panel.
First Time Set-Up
Set the clock
i* Memorize channels
Add/delete channels
Set A]V Network
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
[] Memorize channels
On which input would you
like to memorize?
I_ Ant-A
Ant-B
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu.
i[] Memorize channels
What is connected to
your TV on Ant-A?
b Cable antenna
Indoor/outdoor antenna
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu.
O Press the MENU button oil the
remote control. The TV Main
Menu will al:pear on the screen.
O Select "First Time Set-Up"
using the ADJUST buttons;
then, press ENTER.
Select "Memorize channels"
using the ADJUST buttons;
then, press ENTER.
O
Use the ADJUST button to
select the input to which you
attached an antenna or cable
(ANT-A or Ai_qT-B). Press
ENTER. (If you attached an
antenna to each input, you
should memorize the channels
for one input now, and for the
other input later.)
O
Use the ADJUST buttons to
choose the type of antenna you
connected: Cable antenna or
Indoor/outdoor antenna. Press
ENTER.
]Memorize channels
Now memorizing all the
stations you can receive
on Ant-A.
Channel 004
Not in memory
Please stand-by.
To cance{ memorization,
press CANCEL.
O
You will see a message that
channel memorization is in
progress. A channel being
added to memory will be labeled
"In memory." Channels not
being added will be labeled "Not
in memory." You can stop
channel memorization at any
time by pres,dng CANCEL.
Channel controls will work only after channels h ave
been memorized. After memorization, use the channel controls
(CHANNEL) to automatically advance to the next memorized
channel. Use the number buttons to select individual channels.
56 Chapter 3: Operating Your TV
