Using the Active AN Network Feature (conlL.)
)>Important:
using the QUICK PROGRAM button (QUICK PROG_LkM)
When you press QUICK PROGRAM to begin programming your
VCR:
• Active A/V Network will turn on your VCR and bring it to the
"Program to Record" screen. If tile VCR's clock has not been set,
you will see the "Set the clock" screen. (Se,_ your VCR's Owner's
Guide for information about setting the clock.)
• Active A/V Network will turn on your TV (if it is off), and switch
the TV to Input-1.
You can program your VCR by pointing your remote control at the
TV.
When you press QUICK PROGRAM to end programming ::our
VCR:
• Active A/V Network will turn off'your VCR (unless a tape is
currently playing or recording).
• Active A/V Network will return your TV to the channel it was
on before, or turn it off (if it; was off originally).
using the PLAY button (AUTO PLAY)
When you press PLAY on the remote:
• Active A/V Network will turn your VCR oll and begin playing
the tape (if any).
• Active A/V Network will turn your TV on and switch it to
Input-1.
when you turn your TV off:
• If you set your TV's A/V Network setting to "Active," your VCR
will turn off. unless it is playing or record:[ng.
using the PIP button (SIMULATED TWO TUNER PIP)
You must be watching a broadcast channel on Antenna-A or
Antenna-B to use the Active A/V Network PIP function co_rrectly.
When you press the PIP button on t_he remote to bring up a PIP
image:
• Your VCR will automatically turn on.
• You can see the VCR's picture in the small PIP image.
90 Chapter 4: Using the Special Features
