ʳ˅ˇ˃ˣ˪ˌʳʳ˟˖˗ʳʳˉ˄ʳ
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳʳʳʳʳ
ʳʳ
ʳ
ʳ
3 Electrical characteristics
3.1 Interface signals
1). D-Sub Analog
Input signal : Video, Hsync., Vsync
Video : 0.7 Vp-p, input impedance, 75 ohm @DC
Sync. : Separate sync TTL level , input impedance 2.2k ohm terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate
(Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3). Audio
Input signal: 1000 mVrms
Loudspeaker (Impedance: 16 Ohm +/-15%): 2W+ 2W stereo for RMS Power
Frequency range: 450Hz - 20KHz
Headphone connection will mute speakers
4). USB PLUG 2.0 ( Not required in 240BW )
Input signal: Upstream input (V
BUS
, D+, D-, GND) via USB-B receptacle.
Output signal: Downstream output (V
BUS
, D+, D-, GND) through USB-A receptacle
ˆˁ˅
ˆˁ˅ˆˁ˅
ˆˁ˅ ˜́̇˸̅˹˴˶˸
˜́̇˸̅˹˴˶˸˜́̇˸̅˹˴˶˸
˜́̇˸̅˹˴˶˸ʳ
ʳʳ
ʳ
ʳ
ˆˁ˅ˁ˄
ˆˁ˅ˁ˄ˆˁ˅ˁ˄
ˆˁ˅ˁ˄ ʳʳʳʳ˗
ʳʳʳʳ˗ʳʳʳʳ˗
ʳʳʳʳ˗ˀ
ˀˀ
ˀ˦̈˵ʳ˖˴˵˿˸
˦̈˵ʳ˖˴˵˿˸˦̈˵ʳ˖˴˵˿˸
˦̈˵ʳ˖˴˵˿˸ʳ
ʳʳ
ʳ
ʳ
Length : 1. M +/- 50 mm
Connector type : D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jack screws
