A SERVICE OF

logo

ˉ˅ʳʳʳ˅ˇ˃ˣ˪ˌʳʳ˟˖˗ʳ
General Product Specification
pin assignment :
3.2.2 DVI Cable
The input signals are applied to the display through DVI-D cable.
Length. : 1. M +/- 50 mm
Connector type. : DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
Pin Assignment:
Pin No. Description
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V) – Cable detect
16 Hot plug detect
17 T.M.D.S. data0-
1 T.M.D.S. data0+
PIN No. SIGNAL
1 Red
2 Green/ SOG
3 Blue
4 Sense (GND)
5 Cable Detect (GND)
6 Red GND
7 Green GND
Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock