178Appendix
Appendix
Global Management System User’s Guide
V-Series Admin Setup Menu
System Info :: Admin Setup :: Global Services
Dialing Rules
V-Series Field Type Meaning
Number of Digits in
Extension
User Dened
Value
Sets the number of digits in the dialing extension.
Usually applies to systems that are on a PBX.
International Dialing
Prex
User Dened
Value
Prex required to place international calls. This
prex is automatically appended to any international
calls made from the Global Directory. This overrides
the international dialing prex that is normally set in
the V-Series Country Setup screen.
Public Network Access Drop Down
Menu
Enables this system to dial calls outside of your
private network
Public Network Dialing
Prex
User Dened
Value
Dialing prex as required by the PBX to dial out
to the public network. This prex is automatically
inserted before the dialing numbers to the public
network from the Global Directory.
Public Network (same
area code) Prex
User Dened
Value
Dialing prex required by your PBX to dial out to the
public network. This prex is automatically inserted
before the dialing numbers to the public network in
the Global Directory.
Private Network
Access
Drop Down
Menu
Enables this system to use a private network for
calls
Public Network (same
area code) Prex
User Dened
Value
Dialing prex that is used to access an organization
from outside the private network
If Area Code = User Dened
Value
Area code for conguration
Dial Prex User Dened
Value
Set prexes dialed before the area code
Always dial area code Checkbox
option
Checked - User will need the area code to dial sites
that have the same local area code as the V-Series.
Dial 1+ for all USA
calls
Checkbox
Option
Enable this option if you must dial a “1” before the
area code.
