Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-62 Polycom, Inc.
4 Optional. Some system flags can be defined per Network Service, depending on the
network environment.
To modify these flags, click the Service Configuration button.
The Service Configuration dialog box opens.
All the flags must be manually added to this dialog box. For a detailed description of
the flags and how to add them, see "Manually Adding and Deleting System Flags” on
page 22-18.
The following flags can be defined per service:
—
ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF
— ENABLE_H239
— SIP_ENABLE_FECC
— ENABLE_CLOSED_CAPTION
— ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF
— NUMERIC_CONF_ID_LEN
— NUMERIC_CONF_ID_MIN_LEN
— NUMERIC_CONF_ID_MAX_LEN
— ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWORD
— MAX_CP_RESOLUTION
— QOS_IP_AUDIO
— QOS_IP_VIDEO
— QOS_IP_SIGNALING
— ENABLE_CISCO_GK
Subnet Mask Enter the subnet mask of the RMX in that network service.
Default value: 255.255.255.0.
Table 16-36 IP Network Service - IP Parameters
Field Description
Flags defined per Network Service override their general definition in the System Configuration.
