76 Sun Blade X6270 Server Module Installation Guide • December 2009
Start -> Programs -> Accessories -> Communications ->
Hyperterminal
■ From a Linux client:
Type the appropriate command to start a terminal session. For example, to
start a terminal session on a Linux console, you could launch Minicom.
Minicom is a text-based serial communication program that is included in the
Linux distributions. For more information, see the man pages included in the
Linux distribution.
3. Press Enter on the terminal device to establish a connection between the
terminal device and the ILOM SP.
ILOM displays a login prompt, after a short wait.
login:
Note – If you connect to the serial port on the server before the ILOM SP has been
powered on or during its power-on sequence, SP boot messages might be displayed
prior to the login prompt.
4. Type the default user name and password to log in to the ILOM SP.
Username: root
Password: changeme
ILOM displays a default command prompt (
->), indicating that you have
successfully logged in to ILOM.
▼ Configure the Preinstalled OpenSolaris
Operating System
1. Apply main power to the server by using a nonconductive pointed object or
stylus to press the recessed Power button on the front panel.
For additional information about powering on your server, see “Powering On the
Server Module” on page 38.
POST messages appear on your screen as the OS boots up.
2. Follow the OpenSolaris preinstallation on-screen prompts.
