Suzuki GSX-R1000 Manual

A SERVICE OF

next previous

• Set the crankshaft to the conrods and upper crankcase.

• Apply MOLYBDENUM OIL SOLUTION to the crank pin and

bearing surface.

1rMOLYBDENUM OIL SOLUTION

I

CAUTION

I

I Be sure to clean the conrod big end.

• When fitting the conrod cap, make sure that I.D. code ® on

each conrod faces intake valve side.

• Apply engine oil to the bearing cap bolts.

• Tighten the bearing cap bolt by using a 12 mm, 12 point

socket wrench in the following two steps.

~

Conrod bearing cap bolt:

Initial: 21 N·m (2.1 kgf-m, 15.5 Ib-ft)

Final : 90

0 (1/4 turn)

• Apply engine oil to the conrod big end side surfaces.

• Check the conrod movement for smooth turning.

• Apply MOLYBDENUM OIL SOLUTION to each crankshaft

journal bearing lightly.

1rMOLYBDENUM OIL SOLUTION

ENGINE

3-75