A SERVICE OF

logo

OIL COOLER
REMOVAL
Remove the under cowling. (c::Ta-3)
Drain the engine oil. (c::T2-13)
Remove the oil cooler. (c::T3-4)
INSPECTION AND CLEANING
Road dirt or trash stuck to the fins must be removed.
Use of compressed air is recommended for this cleaning.
Fins bent down or dented can be repaired by straightening
them with the blade of a small screwdriver.
INSTALLATION
Install a new O-ring
0).
I
CAUTION
I
Use the new O-rings to prevent engine oil leakage.
NOTE:
Apply
engine oil to the
a-ring
0).
Tighten the oil cooler hose bolts to the specified torque.
~
Oil cooler hose bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
COOLING
AND
LUBRICATION
SYSTEM
7·19