8-8
CHASSIS
REMOVAL
• Remove the brake calipers.
I
CAUTION
I
Do not operate the brake lever while removing the cal-
ipers.
• Loosen two axle pinch bolts
CD
on the right front fork leg.
• Slightly loosen the front axle
C2l
with the special tool.
,-Pooh
09900-1S740: Hexagon socket (24 mm)
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or a wooden block.
I
CAUTION
I
Do not work by using side stand. Do not support the
motorcycle with exhaust pipe. Make sure that the
motorcycle is supported securely.
• Draw out the front axle and remove the front wheel.
• Loosen two axle pinch bolts
@ on the left front fork leg and
remove the spacer nut
®.
NOTE:
After
removing the front wheel, fit the calipers temporarily to the
original positions.
@
INSPECTION AND DISASSEMBLY
TIRE INSPECTION (c:=rS-70)
• Remove the brake disc.
BRAKE DISC INSPECTION (c:=rS-60)
