A SERVICE OF

logo

8-48
CHASSIS
Remove the swingarm pivot boss by removing its set screws.
Set the swingarm pivot boss by its set screws.
Tighten the swingarm boss nut to the specified torque.
~
Swingarm pivot boss nut: 65 N·m (6.5 kgf-m, 47.0 Ib-ft)
INSPECTION AND DISASSEMBLY
SPACER
Remove the spacers from swingarm.
Remove the spacers from the cushion lever.
Inspect the spacers for any flaws or other damage. If any
defects are found, replace the spacers with new ones.