![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/a8/ba8682b2-cd78-418b-9e70-2ae796bd6789/ba8682b2-cd78-418b-9e70-2ae796bd6789-bg5.png)
© Titan Tool. All rights reserved. 5
English
IMPORTANT: Make sure the siphon tube is firmly inserted
into the inlet fitting, past the O-ring as shown below. If the
tube is not fully inserted, a seal will not be achieved and the
pump will not prime. DO NOT insert the notched end of the
suction tube into the inlet fitting.
NOTE: The siphon tube should go into the inlet
approximately 3/4” in order to be fully inserted.
~3/4” (19 mm)
Siphon
tube
Inlet fitting
O-ring
Incorrect
Correct
6. If desired, attach the siphon lter at the notched end of the
siphon tube (the larger tube). The lter will prevent any
debris in the spray material from getting into the pump.
Siphon tube
Notch
Siphon filter
7. Make sure the electrical service is 120V, 15 amp
minimum.
8. Plug the turbine power cord into a properly grounded
outlet at least 25’ from the spray area.
Connecting the Material Hose
1. Thread the end of the uid hose onto the Transfer Pump
uid outlet and tighten with a wrench.
2. Thread the other end of the material hose onto the spray
gun inlet and tighten with a wrench.
Outlet valve
Fluid hose
Fluid hose
Spray gun
Inlet
Hose Congurations
Spraying without whip hoses
Follow the conguration below if you want to spray without the
uid and air whip accessories.
NOTE: When strapping the hoses together, start at the
spray gun and work your way back.
NOTE: 30 ft uid hose - included with Transfer Pump
30 ft air hose - included with turbine (25 ft air
hose included with CS75)
Hose straps - included with Transfer Pump
Spraying with whip hoses
Follow the conguration below if:
1. You already have the air whip hose and you purchased a
uid whip hose kit.
2. You have purchased both the uid whip hose kit and the
air hose whip kit.
Air hose
Fluid hose
Fluid whip
hose
Air whip
hose
Straps
Move coupling
NOTE: When strapping the hoses together, start at the
spray gun and work your way back.
NOTE: 30 ft uid hose - included with Transfer Pump
30 ft air hose - included with turbine
5 ft air whip hose - included with the CS105 and
CS115
5 ft uid whip hose - sold separately.