NOTE:
Follow this procedure only if you have a Home Hub.
When you first plug in your Beyond Microwave Oven, the oven’s display window will prompt you to
enter your Home Code.
• To obtain your Home Code, follow the instructions in the Home Hub Owner’s manual. Your Home
Code will appear in the Home Hub display. Make a note of your Home Code. This will be used for
all of your Beyond Appliances.
1. Press the HC button on the oven’s control panel
2. Use the number pad on the oven’s control panel to enter your Home Code.
3. Press HC to save the Home Code to the oven’s memory.
Using the Scanning Wand
Your Beyond Microwave Oven is equipped with a scanning wand that is similar to scanning
equipment used in many retail settings. The scanning wand on your Beyond Microwave is like
having a “magic” wand that tells your oven to automatically program itself for the ideal
cooking time and power levels for packaged, microwaveable foods.
To use the scanning wand:
1. Locate the barcode on the package of food that you wish to prepare. On the oven control panel,
press SCAN. A red light will come on in the end of the scanning wand.
2. Hold the scanning wand as you would hold a pencil. Place the lighted end of the wand flat
against the package and to the left of the barcode.
3. Using a steady sweeping motion, move the wand across the bar code from left to right and from
right to left at a medium to fast speed. Be sure to scan the entire barcode and to keep the wand
tip touching the package. A beep tells you that the barcode was scanned successfully.
Figure 4.
Scan the entire barcode from left to right beginning outside the left edge
then back across it right to left.
If the oven finds the barcode in its database:
If the oven finds the barcode in its database, it will automatically program itself for the
correct time and power setting to prepare the food.
1. Before placing the food in the oven, be sure to follow label instructions for the
recommended container type and size.
• If the food is prepared in the original packaging, follow label instructions for package
preparation (peeling back a corner, piercing, puncturing, or slitting).
• Or, follow label directions for selecting an appropriate microwave-safe container and
covering or uncovering the dish as needed.
2. Place the food in the oven and press START to begin cooking.
16
Microwave Owner’s Manual
