Control Panel
The control panel is shown in Figure 3, below. Control panel push buttons and features are
described in Table 1, immediately following.
2. Number Pad
3.
STOP/CANCEL
4. DEFROST
5.
START
6. LEARN
7. Display Windo
w
8. Scanning
Wand
9. Home Code Selecto
r
10. SCAN
11. ADD 1 MINUTE
12. CLOCK
1.
Power Level
Selecto
r
1
12
11
10
9
8
2
3
4
5
6
7
Figure 3
Table 1. Beyond Microwave Oven Control Panel
Figure
No.
Push
Button or
Feature
Function
1 POWER Press POWER to select a power setting. The power setting (P 10,
P 9 etc.) will apear in the display window. The default setting is P 10,
the highest power setting. Pressing POWER repeatedly causes the
power setting to decrease one level at a time, from P 10 (highest) to P
1 (lowest). To change levels more rapidly, press and hold POWER until
you reach the desired level.
During oven operation, pressing POWER will cause the current power
level to appear briefly on the display.
2 Number
Pad
The number pad allows you to enter digits for time.
• For setting the clock, please refer to Section 1,
Introducing the Beyond Microwave Oven on page 8.
• Please refer to Section 3, Basic Oven Operation,
on page 11 for instructions on entering cooking times.
3 STOP/
CANCEL
Press STOP/CANCEL once to temporarily interrupt any oven opera-
tion. To resume, press START.
Press STOP/CANCEL twice to cancel any oven operation or
program.
4 DEFROST Press DEFROST once to use the oven’s Auto Defrost function. Press
twice to begin Time Defrost. Please refer to Section 4, Defrosting on
page 13 for detailed instructions on using the defrost function.
9
Get To Know Your Beyond
™
Microwave Oven
