-101-
3.6.1.3 Remote Management
On this page you can configure the Remote Management function. This feature allows managing your
Router from a remote location via the Internet.
Choose the menu Maintenance→Setup→Remote Management to load the following page.
Figure 3-69 Remote Management
The following items are displayed on this screen:
¾ Remote Management
Subnet/Mask: Specify a single IP address or network address for the hosts desired to
access the Router from external network.
Status: Activate or inactivate the entry.
¾ List of Subnet
In this list, you can view the Remote Management entries and edit them by the Action buttons.
The first entry in Figure 3-69 indicates that: The hosts with IP address in subnet of 192.168.2.0/24 are
allowed to access the Router and this entry is activated.
3.6.2 Management
3.6.2.1 Factory Defaults
Choose the menu Maintenance→Management→Factory Defaults to load the following page.
Figure 3-70 Factory Defaults
Click the <Restore to Factory Defaults> button to reset all configuration settings to their default values.
The default IP address is 192.168.0.1; the default login user name and password are both admin.
