Programming the Machine
WorkCentre Pro 555/575 2-33
5. The Master Department Code entry is completed. To setup
individual Department Codes, go to step 6. To exit this feature,
press
Stop
.
6. Enter a number between 2 and 50 to assign to this Department,
then press
Enter.
7. Using the Numeric Keypad, enter the name to assign to this
Department (max 20 characters), then press
Enter
. Refer to the
“Character Entries” Section.
8. Using the Numeric Keypad, enter the 5-digit Department Code to
assign to this Department, then press
Enter
.
9. The Department Code entry is completed. To set additional
Department codes, repeat steps 6 through 8. To exit this feature,
press
Exit
or
Stop
.
Note: The 5-digit Department Code is required to access and
operate the WorkCentre.
Dept. number (1-50)
[
]
Name (40 max)
[
]
Dept. code
[
]
