Chapter 7 MAC Management
GS1510 Series User’s Guide
52
• If the Switch has not already learned the port for this MAC address, then the
frame is flooded to all ports. Too much port flooding leads to network
congestion.
• If the Switch has already learned the port for this MAC address, but the
destination port is the same as the port it came in on, then it filters the frame.
Figure 29 MAC Table Flowchart
7.4 Static MAC Settings
A static Media Access Control (MAC) address is an address that has been manually
entered in the MAC address table. Static MAC addresses do not age out. When you
set up static MAC address rules, you are setting static MAC addresses for a port.
This may reduce the need for broadcasting.
Click Basic Settings > MAC Management > Static MAC Settings in the
navigation panel to display the configuration screen as shown.
Figure 30 Static MAC Settings
