Chapter 9 Port Settings
GS1510 Series User’s Guide
59
The following table describes the labels in this screen.
Table 11 Port Settings
LABEL DESCRIPTION
Port Settings
Port Select a port number you want to configure on this screen.
State Select Enable to activate the port or Disable to deactivate the port.
Speed/Duplex Select the speed and duplex mode of the port. The choices are:
• Auto
• 10 Mbps / Full Duplex
• 10 Mbps / Half Duplex
• 100 Mbps / Full Duplex
• 100 Mbps / Half Duplex
• 1000 Mbps / Full Duplex
• 1000 Mbps / Half Duplex
Flow Control Select On to enable access to buffering resources for the port thus
ensuring lossless operation across network switches. Otherwise, select
Off to disable it.
Apply Click Apply to save the changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Port Status
Port This field displays the port number.
State This field displays whether the port is enabled or disabled.
Speed/Duplex This field displays the speed either 10M, 100M or 1000M and the duplex
mode Full or Half.
Flow Control
This field displays whether the port’s flow control is On or
Off.
Link Status This field displays the link status of the port. If the port is up, it displays
the port’s speed, duplex and flow control setting. Otherwise, it displays
Link Down if the port is disabled or not connected to any device.
