Chapter 10 VLAN
GS1510 Series User’s Guide
69
10.7 Port Settings
Use this screen to configure the VLAN port settings. Click Advanced Settings >
VLAN > VLAN > Port Settings to display the following screen.
Figure 37 Port Settings
The following table describes the labels in this screen.
Table 15 Port Settings
LABEL DESCRIPTION
Port Select a port number to configure from the drop-down box.
Select All to configure all ports at the same time.
PVID Select a PVID (Port VLAN ID number) from the drop-down box.
Acceptable
Frame
Specify the type of frames allowed on a port. Choices are All, VLAN
Untagged Only or VLAN Tagged Only.
Select All from the drop-down list box to accept all untagged or tagged
frames on this port. This is the default setting.
Select VLAN Untagged Only to accept only untagged frames on this port.
All tagged frames will be dropped.
Select VLAN Tagged Only to accept only tagged frames on this port. All
untagged frames will be dropped.
Apply Click this to save any changes to the Switch.
Refresh Click this to reload the screen and reset any changes that were just made.
Port Status
