GS1510 Series User’s Guide
117
CHAPTER 19
802.1x
This chapter describes the IEEE 802.1x screens.
19.1 Overview
Port authentication is a way to validate access to ports on the Switch to clients
based on a local or external server (authentication server). The Switch supports
the following method for port authentication:
• IEEE 802.1x
1
- An authentication server validates access to a port based on a
username and password provided by the user.
The Switch can authenticate users who try to log in based on user accounts
configured on the Switch itself. The Switch can also use an external authentication
server to authenticate a large number of users. This external method of
authentication uses the RADIUS (Remote Authentication Dial In User Service, RFC
2138, 2139) protocol to validate users. See Section 19.3 on page 118 for more
information on configuring your RADIUS server settings.
19.2 What You Can Do
•Use the Global Settings screen (Section 19.4 on page 118) to activate IEEE
802.1x security and configure the local or RADIUS server settings.
•Use the Port Setting screen (Section 19.5 on page 120) to configure IEEE
802.1x port authentication settings.
1. At the time of writing, IEEE 802.1x is not supported by all operating systems. See your operating system
documentation. If your operating system does not support 802.1x, then you may need to install 802.1x client
software.
