Chapter 16 Storm Control
GS1510 Series User’s Guide
94
The following table describes the labels in this screen.
Table 26 Broadcast Storm Control
LABEL DESCRIPTION
Storm Control Settings
Port Select the port number for which you want to configure storm control
settings.
Rate Select the number of packets (of the type specified in the Type field) per
second the Switch can receive per second.
Type Select
Broadcast - to only specify a limit for the amount of broadcast packets
received per second.
Multicast - to only specify a limit for the amount of multicast packets
received per second.
DLF - to only specify a limit for the amount of DLF packets received per
second.
Bcast+Mcast - to specify a limit for the amount of broadcast and
multicast packets received per second.
Mcast+DLF - to specify a limit for the amount of multicast and DLF
packets received per second.
Bcast+DLF - to specify a limit for the amount of broadcast and DLF
packets received per second.
Bcast+Mcast+DLF - to specify a limit for the amount of broadcast,
multicast and DLF (Destination Lookup Failure) packets received per
second.
Apply Click Apply to save your changes.
Refresh Click Refresh to begin configuring this screen afresh.
Storm Control Status
Port This field displays the number of a port.
Rate (pps) This field displays the number of packets (of the type displayed in the
Type field) per second the Switch can receive per second.
Type This field displays the packet types that the limit (of the rate displayed in
the Rate field) is applied on the Switch.
