Chapter 4 The Web Configurator
GS1510 Series User’s Guide
42
4.3.4 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click Management > User Account to display the next
screen. Click 1 in the No. field to change the admin password.
Figure 23 Change Administrator Login Password
802.1x Use this screen to configure 802.1x authentication method. This
method uses an authentication server (RADIUS server) to validate
access to a port based on a username and password provided by the
user.
Web
Authentication
Use this screen to configure settings that define when notifications are
sent to an external management station.
Management
Maintenance Use this screen to perform firmware upgrades, configuration backup
and restore.
SNMP Use this screen to reboot the Switch or to restore the default
configuration of the Switch.
Use this screen to define security parameters for SNMP v1 and SNMP
v2c.
Use this screen to configure settings that define when notifications are
sent to an external management station.
User Account Use this screen to create users and assign them to pre-defined SNMP
groups.
Table 3 Navigation Panel Links (continued)
LINK DESCRIPTION
