AT&T Z221 Cell Phone Accessories User Manual


 
Getting Started
3
NOTE: In this User Manual, “press a key” means to
press the key and release it, while “hold a key” means
to press the key for at least two seconds and then
release it.
Removing the Back Cover
1. Hold the Power/End Key to turn off
the phone.
2. Lift the bottom of the back cover from the notch and
remove the back cover as shown below.
Battery
Installing the Battery
NOTES:
• The phone automatically turns off if the battery
power is too low.
• If you are not going to use the battery for a long
time, remove it from the phone and store it in a cool,
dry place.
1. Hold the Power/End Key to turn off the phone.
2. Remove the back cover of your phone.
3. Carefully insert the battery with the contacts located
against the metal springs.
4. Push down the battery until it clicks into place.
5. Replace the cover on the back of the phone.
CAUTION: Make sure the cover is lined up before
pressing it into place. Do not force it. Doing so will
damage the back cover.
Removing the Battery
1. Hold the Power/End Key to turn off the phone.
2. Remove the back cover of your phone.
3. Lift the end of the battery near the bottom of the
phone to remove it.