Dell X50 Cell Phone User Manual


 
Getting Connected 93
3
To add, edit, or delete a profile, tap
Network Cards
.
NOTE: If tapping the Network Cards icon does not open up the Configure
Wireless Networks screen, enable the wireless radio by pressing the
on/off button with WLAN/Bluetooth wireless technology on your device.
4
On the
Configure Wireless Networks
screen, select one of the available
network names.
NOTE: If the network name is not listed, you must add a configuration
profile for each wireless network environment in which you want to use
your (mobile) wireless client station. If you plan to use your wireless client
station in multiple networking environments that require different
configuration settings, you can define dedicated profiles for each
environment. For example, you can create a configuration profile for your
office headquarters, a branch office, and your small office/home office.
a
If no network name is listed, tap
Add New Settings...
and type in the
network name. Select the
The Internet
or
Work
connection method
from the drop-down menu. If you want to set up a peer-to-peer
connection, tap the
This is a device-to-device (ad-hoc) connection
check box.
b
Tap the
Network Key
tab to adjust the configurations. To disable
encryption, tap the
Authentication
drop-down menu and tap
Open
.
Now, select
Disabled
from the
Data Encryption
drop-down menu.
If you are using
Network Authentication (Shared mode)
, tap the
Authentication
drop-down menu, select
Shared,
and then select
the proper encryption method from the
Data Encryption
drop-down menu.
If you do require encryption and are provided with the key
automatically, the
The key is provided for me automatically
check box, when unchecked, allows you to enter the
encryption key yourself. You can enter key values in either
alphanumeric value or hexadecimal value. The encryption key
value is case-sensitive. Consult your LAN Administrator or
wireless router documentation for the correct value.
If you are using IEEE 802.1x option you will first need to get a certificate
through a non 802.1x enabled wireless network connected to a certificate
server. Select or configure a non 802.1x enabled wireless network from
the list.