Filter
Top Products
Suspend Mode
Suspend Mode turns the touch screen off and locks the terminal. To save
battery power, the terminal enters Suspend Mode when the device is inactive
for a programmed period of time. To adjust the timeout limit, tap the Apps
Launcher > Settings > Display > Screen Timeout.
1. Press and release the Power key to toggle the terminal in or out of
Suspend Mode.
2. Drag to the right on the touch screen to unlock the terminal.
Note: You should always place the terminal in suspend mode when replacing
the battery pack.
Silent Mode and Airplane Mode
1. Press and hold the Power key for approximately 5 seconds.
2. Tap Silent Mode or Airplane Mode on the Phone Options menu to
toggle the mode ON or OFF.
Note: When Airplane Mode is turned on,
shows on the status bar.
Removing the Battery Pack
1. Press and release the Power key to enter Suspend Mode, then
release the hand strap.
2. Unlock the battery.
3. Wait three seconds, then slide the battery release button away from the
stylus slot.
4. Remove the battery.