Hughes 7101 Cell Phone User Manual


 
8
Getting startedPhone number listsDuring a callDiversionSMS/BroadcastSecurity settings
: Making and receiving calls
To make calls you have to be logged in to a
network and the signal strength must be
adequate.
If in SAT mode the SAT icon 2 is flashing,
make sure that the mobile phone has a clear
view of the sky so that proper registration
can take place.
Note:
For more information about making and
receiving calls, see ’Options during a call’ on
page 17.
}Dial using the keypad
To dial a number in the ’traditional’ way:
Enter the number via the keypad.
For international calls press
0
first, until
+
is displayed.
Then enter the country code with-
out a leading ’0’
Press !
Note:
To add a pause in your dialling string you
may long press the
%
key (p is displayed to
indicate the pause).
End a call
Press f
}Receiving a call
When you receive a call this is indicated in
several ways:
You hear the ringing tone (melody and
volume according to the current setting)
–The % symbol is displayed
The calling number is displayed if it is
transmitted. If the number is stored in
the phonebook, the corresponding name
is displayed instead of the number
Incoming calls (examples):
Accept a call
Press Accept or the Earset button on the
microphone
Reject a call
Press Reject
Turn ringing off
If you are called in a situation when ringing is
disturbing, you have the option to turn the
ringing tone off temporarily while the incom-
ing call is being signalled:
Press ’scroll-up key’ b
Accept
!
$
+6547895894
%
Reject
Accept
!
$
John Fox
%
Reject
8
8